Operating Instructions ค ม อการใช งาน

Transcription

1 Operating Instructions ค ม อการใช งาน High Definition Video Camera กล องถ ายว ด โอความละเอ ยดส ง Model No. HDC-SDT750 HDC-TMT750 Before use, please read these instructions completely. โปรดอ านค ม อให ละเอ ยดก อนใช งาน Please also refer to the Operating Instructions (PDF format) contained on the CD-ROM (supplied). You can learn about advanced operation methods and check the Troubleshooting. กร ณาอ านรายละเอ ยดจากค าแนะน าในการใช งาน (ไฟล PDF) ท จ ดเก บไว ในแผ น CD-ROM (จ ดมาให ) ค ณสามารถด ว ธ การใช งานข นส งและตรวจสอบว ธ การแก ไขป ญหาเพ มเต มได VQT3B29

2 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. USE ONLY THE RECOMMENDED ACCESSORIES. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. Concerning the battery Warning Risk of fire, explosion and burns. Do not disassemble. Do not heat the batteries above the following temperatures or incinerate. Button-type battery 60 oc Battery pack 60 oc CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer s instructions. Warning Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor. Button-type battery: CR2025 For Australia and New Zealand IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD. 2 VQT3B29 (ENG)

3 English Product identification marking Product High Definition Video Camera AC adaptor -If you see this symbol- Location Battery holder Bottom How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1) Open the fuse cover with a screwdriver. 2) Replace the fuse and close or attach the fuse cover. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Cautions for use For Australia and New Zealand In the event of abnormal operation (e.g. if the unit emits smoke or an unusual smell), immediately stop operating the unit and consult the Panasonic Customer Care Centre on Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound. Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors. Electromagnetic wave radiation generated by microprocessors may adversely affect this unit, disturbing the pictures and/or sound. If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn this unit on. Do not use this unit near radio transmitters or high-voltage lines. If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected. About connecting to a PC Do not use any other USB cables except the supplied one. 3 (ENG) VQT3B29

4 Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. Cards that you can use with this unit SD Memory Card, SDHC Memory Card and SDXC Memory Card 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications. Refer to page 16 for more details on SD cards. These operating instructions are designed for use with models and. Pictures may be slightly different from the original. The illustrations used in these operating instructions show model, however, parts of the explanation refer to different models. Depending on the model, some functions are not available. Features may vary, so please read carefully. Not all models may be available depending on the region of purchase. For the purposes of these operating instructions SD Memory Card, SDHC Memory Card and SDXC Memory Card are referred to as the SD card. Functions that can be used for motion picture recording/motion picture playback are indicated by in these operating instructions. Functions that can be used for still picture recording (including the still picture recording in motion picture recording mode)/still picture playback are indicated by in these operating instructions. Pages for reference are indicated by an arrow, for example: l 00 4 VQT3B29 (ENG)

5 Contents Information for Your Safety...2 Accessories...6 Preparation Before using [1] Parts identification and handling... 8 Setup [1] Power supply Charging the battery Inserting/removing the battery Charging and recording time Connecting to the AC outlet [2] Recording to a card Cards that you can use with this unit Inserting/removing an SD card [3] Turning the unit on/off Turning the unit on and off with the power button Turning the unit on and off with the LCD monitor/viewfinder [4] Selecting a mode [5] Adjusting LCD monitor/ viewfinder How to use the touch screen Viewfinder adjustment [6] Setting date and time Basic Recording/Playback [1] Selecting a media to record [HDC-TMT750] [2] Recording motion pictures [3] Recording still pictures [4] Intelligent auto mode [5] Motion picture/ Still picture playback Setup [1] Using the menu screen Language selection Advanced Recording (Advanced) [1] Zoom in/out function Zoom mode Ring zoom Extra optical zoom [2] Image stabilizer function Optical image stabilizer lock [3] Recording 3D video Functions not available during 3D recording Editing [1] Deleting scenes/ still pictures [2] Formatting With a TV [1] Watching Video/Pictures on your TV [2] 3D video playback Functions not available during 3D playback Others Specifications...43 About copyright...48 Reading the Operating Instructions (PDF format)...49 Others Advanced Basic Preparation 5 (ENG) VQT3B29

6 Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Aug These may be subject to change. Battery pack VW-VBG130 AC adaptor VSK0698 AC cable A K2CT39A00002 B K2CJ29A00002 ( only) C K2CQ29A00002 A Hong Kong Special Administrative Region of China and Saudi Arabia B Australia and New Zealand C Areas Other than Hong Kong Special Administrative Region of China, Saudi Arabia, Australia and New Zealand DC cable K2GJYDC00004 Lens hood VDW2053 Shoe adaptor VYC0996 CD-ROM Software CD-ROM Operating Instructions VFF0705 3D Conversion Lens Lens storage bag VFC4619 Remote control (Battery built-in) N2QAEC AV multi cable K1HY12YY0004 USB cable K1HY04YY0032 HDMI mini cable VFA0531 Lens front cap * VYK4K64 Lens rear cap * VGQ0M57 * This is attached to the 3D Conversion Lens at the time of purchase. Stylus pen VGQ0C14 6 VQT3B29 (ENG)

7 Optional accessories Product numbers correct as of Aug These may be subject to change. Some optional accessories may not be available in some countries. AC adaptor (VW-AD21E/EB-K) *1 Battery pack (lithium/vw-vbg130) Battery pack (lithium/vw-vbg260) Battery pack (lithium/vw-vbg6) *2 Battery pack holder kit (VW-VH04) HDMI mini cable (RP-CDHM15, RP-CDHM30) Wide conversion lens (VW-W4607H) Wide end conversion lens (VW-WE08H) *3 Filter kit (VW-LF46NE) *4 Video DC light (VW-LDC103E) Light bulb for video DC light (VZ-LL10E) Stereo microphone (VW-VMS2E) *5 Shoe adaptor (VW-SK12E) DVD burner (VW-BN2) DVD burner (VW-BN01) *1 The supplied DC cables cannot be used on this unit. *2 The battery pack holder kit/vw-vh04 (optional) is necessary. *3 When using the VW-WE08H, set the zoom to W (wide) side. The focus will be slightly out when it is set to T (tele) side, so remove the VW-WE08H when recording set to T (tele) side. *4 When using the VW-LF46NE, remove the lens hood (supplied) and set to the flash setting to (OFF). *5 External microphone may intrude into the frame when recording. Set the zoom to wide angle, and tilt the external microphone upward so it will not intrude into the frame. This will not affect the audio being recorded. 7 (ENG) VQT3B29

8 Preparation Before using 1 Parts identification and handling Speaker 2 Power button [ ] (l 18) 3 Inlet (cooling fan) 4 Intelligent auto/manual button [ia/manual] (l 25) 5 Optical image stabilizer button [ O.I.S.] (l 31) 6 Eyepiece corrector dial (l 20) /50p button [1080/50p] 8 Battery release lever [BATT] (l 13) 9 Battery holder (l 13) 10 DC input terminal [DC IN] (l 15) Always use the supplied AC adaptor or a genuine Panasonic AC adaptor (VW-AD21E/EB-K; optional). 11 HDMI mini connector [HDMI] (l 39) 12 USB terminal [ ] 13 AV multi connector (l 39) Use the AV multi cable (only the supplied cable). 14 Card slot (l 17) 15 Access lamp [ACCESS] (l 17) Lens cover The lens cover opens in motion picture recording mode or still picture recording mode. (l 19) 17 Multi manual ring 18 Camera function button [CAMERA FUNCTION] 19 Remote control sensor 20 Built-in flash 21 3D Conversion Lens attachment part (concave) (l 32) 22 Lens (LEICA DICOMAR) 23 AF assist lamp 24 Recording lamp 24 8 VQT3B29 (ENG)

9 LCD monitor (Touch screen) (l 20) It can open up to 90o It can rotate up to 180o A towards the lens or 90o B towards the viewfinder. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture. 26 Viewfinder (l 20) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the viewfinder screen. However, this is not a malfunction and does not affect the recorded picture. 27 Quick menu button [Q.MENU] 28 Sub recording start/stop button This button functions in the same manner as the recording start/stop button. 29 Adjust zoom buttons (l 29) 30 Menu button [MENU] (l 28) 31 Delete button [ ] (l 37) 32 Tripod receptacle 32 9 (ENG) VQT3B29

10 Shoe adaptor mounting part 34 Shoe adaptor cover 35 Shoe adaptor release lever [SHOE ADAPTOR RELEASE] 36 Photoshot button [ ] (l 24) 37 Zoom lever [W/T] (In motion picture recording mode or still picture recording mode) (l 29) Thumbnail display switch [ / ]/ Volume lever [svolr] (In playback mode) 38 Status indicator (l 18) 39 Internal microphones 40 Recording start/stop button (l 23) 41 Mode dial (l 19) 42 Shoulder strap fixture 43 Grip belt Adjust the length of the grip belt so that it fits your hand MIC Flip the belt. 2 Adjust the length. 3 Replace the belt. 44 Microphone terminal [MIC] A compatible plug-in powered microphone can be used as an external microphone. Audio will be stereo (2 ch) with the external microphone input. When the unit is connected with the AC adaptor, sometimes noise may be heard depending on the microphone type. In this case, please switch to the battery for the power supply and the noise will stop. 45 Headphone terminal [ ] Excessive sound pressure from earphones and headphones can cause hearing loss. Listening at full volume for long periods may damage the user s ears. 10 VQT3B29 (ENG)

11 About the 3D Conversion Lens (l 32) Attachment screw 2 Protective glass (front) 3 Lens 4 Adjustment dial cover 5 Vertical position adjustment dial [ ] 6 Vertical alignment adjustment dial [ ] 7 Horizontal image position adjustment dial [ ] 8 Protective glass (rear) 9 Camera body attachment part (convex) 8 9 Lens front cap Horizontal line for adjustment Use to adjust the lens attachment position. If you use the lens front cap as a stand as shown below, you can leave the unit with the 3D Conversion Lens attached. 11 (ENG) VQT3B29

12 Preparation Setup 1 Power supply About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBG130/VW-VBG260/VW-VBG6) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products. To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required. It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used. Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. Important: If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. Charging lamp [CHARGE] A Lights up: Charging (Battery charging time: l 14) Goes off: Charging completed Flashing: Be sure to connect the unit correctly 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Insert the battery into the AC adaptor by aligning the arrows. 12 VQT3B29 (ENG)

13 We recommend using Panasonic batteries (l 6, 7, 14). If you use other batteries, we cannot guarantee the quality of this product. Do not heat or expose to flame. Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. Removing the battery Be sure to hold down the power button until the status indicator goes off. Then remove the battery while supporting the unit to prevent it dropping. Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked. A Insert the battery until it clicks and locks. BATT CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer s instructions. 13 (ENG) VQT3B29

14 Charging and recording time Charging/Recording time Temperature: 25 oc/humidity: 60%RH Battery model number [Voltage/Capacity (minimum)] Supplied battery/ VW-VBG130 (optional) [7.2 V/1250 mah] VW-VBG260 (optional) [7.2 V/2500 mah] VW-VBG6 (optional) * [7.2 V/5400 mah] Charging time 2h35min 4h40min 9h25min HDC-SDT750 Recording mode Maximum continuously recordable time Actual recordable time 1080/50p, HA, HG, HX 1h40min 1h HE 1 h 5 min 1080/50p 3 h 10 min 1 h 55 min HA, HG, HX 3h15min HE 3 h 20 min 2h 1080/50p 7 h 50 min 4 h 50 min HA 8h5min 5h HG, HX 8h10min HE 5 h 5 min Battery model number [Voltage/Capacity (minimum)] Supplied battery/ VW-VBG130 (optional) [7.2 V/1250 mah] VW-VBG260 (optional) [7.2 V/2500 mah] VW-VBG6 (optional) * [7.2 V/5400 mah] Charging time 2h35min 4h40min 9h25min HDC-TMT750 Recording mode Maximum continuously recordable time Actual recordable time 1080/50p, HA, HG, HX 1h40min 1h HE 1 h 5 min 1080/50p 3 h 10 min 1 h 55 min HA, HG, HX 3h15min HE 3 h 20 min 2h 1080/50p 7 h 50 min 4 h 50 min HA 8h5min 5h HG, HX 8h10min HE 5 h 5 min * The battery pack holder kit VW-VH04 (optional) is necessary. These times are approximations. The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/low temperature. Recordable time of 3D recording mode is the same. (During 3D recording mode, 1080/50p recording mode can not be used.) 14 VQT3B29 (ENG)

15 The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. The batteries heat up after use or charging. This is not a malfunction. Battery capacity indication The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash. The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use. If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not change until the remaining time falls below 9 hours 59 minutes. When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown. Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always live as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. DC IN A B DC output terminal DC input terminal Insert the DC cable matching the [ ] mark of the DC input terminal. 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Connect the DC cable to the DC input terminal [DC IN]. When removing the AC adaptor, be sure to hold down the power button until the status indicator goes off. Then remove the AC adaptor. 15 (ENG) VQT3B29

16 Preparation Setup 2 Recording to a card The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an SD card, read the following. This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/sdxc memory card with other equipment, check the equipment is compatible with these memory cards. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording. Card type Capacity Motion picture recording SD Memory Card SDHC Memory Card SDXC Memory Card 8MB/16MB/32MB Cannot be used. 64 MB/128 MB/ Cannot be guaranteed in operation. 256 MB 512 MB/1 GB/ 2GB 4GB/6GB/8GB/ 12 GB/16 GB/ 24 GB/32 GB 48 GB/64 GB Can be used. Still picture recording Can be used. * The SD Speed Class Rating is the speed standard for successive writes. Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC Memory Cards that can be used for motion picture recording on the following website. e_cam (This website is in English only.) 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications. When the write-protect switch A on SD card is locked, no recording, deletion or editing will be possible on the card. Keep the Memory Card out of reach of children to prevent swallowing VQT3B29 (ENG)

17 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp [ACCESS] A When this unit is accessing the SD card or built-in memory, the access lamp lights up. 1 Open the LCD monitor. 2 Open the SD card/terminal cover and insert (remove) the SD card into (from) the card slot. Face the label side B in the direction shown in the illustration and press it straight in as far as it will go. Press the centre of the SD card and then pull it straight out. 3 Securely close the SD card/ terminal cover. Securely close it until it clicks. Do not touch the terminals on the back of the SD card. Do not apply strong shocks, bend, or drop the SD card. Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. When the card access lamp is lit, do not: jremove the SD card jturn the unit off jinsert and remove the USB cable jexpose the unit to vibrations or shock Performing the above while the lamp is on may result in damage to data/sd card or this unit. Do not expose the terminals of the SD card to water, garbage or dust. Do not place SD cards in the following areas: jin direct sunlight jin very dusty or humid areas jnear a heater jlocations susceptible to significant difference in temperature (condensation can occur.) jwhere static electricity or electromagnetic waves occur To protect SD cards, return them to their cases when you are not using them. Refer to the Operation Instructions (PDF format) about disposing of or giving away the SD card. 17 (ENG) VQT3B29

18 Preparation Setup 3 Turning the unit on/off You can turn the unit on and off using the power button, the LCD monitor or the viewfinder. Turning the unit on and off with the power button Press the power button to turn on the unit To turn off the unit Hold down the power button until the status indicator goes off. A The status indicator lights. Turning the unit on and off with the LCD monitor/ viewfinder Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD monitor/viewfinder turns off the unit. During general use, you may find it convenient to turn the unit on/off using the LCD monitor or viewfinder. To turn on the unit To turn off the unit A The status indicator lights. B The status indicator goes off. The unit will not turn off unless the LCD monitor is closed and the viewfinder is retracted. The unit will not turn off while recording motion pictures even if the LCD monitor is closed and the viewfinder is retracted. In the following cases, opening the LCD monitor or extending the viewfinder does not turn on the unit. Press the power button to turn on the unit. jwhen the unit is purchased jwhen you have turned off the unit using the power button 18 VQT3B29 (ENG)

19 Preparation Setup 4 Selecting a mode Change the mode to recording or playback. Operate the mode dial to change the mode to, or. Align with the status indicator A. Motion picture recording mode (l 23) Still picture recording mode (l 24) Playback mode (l 26) 19 (ENG) VQT3B29

20 Preparation Setup 5 Adjusting LCD monitor/ viewfinder How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. Touch Touch and release the touch screen to select icon or picture. About the operation icons / / / : These icons are used to switch the menu and thumbnail display page, for item selection and setting etc. : Touch to return to the previous screen such as when setting menus. Touch the centre of the icon. Touching the touch screen will not operate while you are touching another part of the touch screen. Drag Move your finger while pressing on the touch screen. Can be used during direct playback and playback zoom. Do not touch the LCD monitor with hard pointed tips, such as ball point pens. Perform the touch screen calibration when the touch is not recognised or wrong location is recognised. Viewfinder adjustment Adjusting the field of view It adjusts the field of view to show the images on the viewfinder clearly. Adjust the focus by rotating the eyepiece corrector dial. Extend the viewfinder and close the LCD monitor to turn on the viewfinder. 20 VQT3B29 (ENG)

21 Preparation Setup 6 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. Change the mode to or. 1 Select the menu. : [SETUP] # [CLOCK SET] 2 Touch the date or time to be set, then set the desired value using /. A Displaying the World time setting: [HOME]/ [DESTINATION] The year can be set between 2000 and The 24-hour system is used to display the time. 3 Touch [ENTER]. The clock function starts at [00] seconds. A message prompting for World time setting may be displayed. Perform the World time setting by touching the screen. Touch [EXIT] or press the MENU button to complete the setting. The date and time function is driven by a built-in lithium battery. When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx. 6 months. (The battery is still being recharged even if the unit is off.) For Australia and New Zealand WARNING THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE. 21 (ENG) VQT3B29

22 Basic Recording/ Playback 1 Selecting a media to record [HDC-TMT750] The card and built-in memory can be selected separately to record motion pictures or still pictures. 1 Change the mode to or. 2 Select the menu. : [MEDIA SELECT] 3 Touch the media to record motion pictures or still pictures. A B C D [VIDEO/SD CARD] [VIDEO/Built-inMemory] [PICTURE/SD CARD] [PICTURE/Built-inMemory] The media is selected separately to motion pictures or still pictures is highlighted in yellow. 4 Touch [ENTER]. 22 VQT3B29 (ENG)

23 Basic Recording/ Playback 2 Recording motion pictures 1 Change the mode to. 2 Open the LCD monitor or extend the viewfinder. 3 Press the recording start/stop button to start recording. B When you begin recording, ; changes to. 4 Press the recording start/stop button again to pause recording. Align with the status indicator A. Screen indications in the motion picture recording mode HG 0h00m00s R 1h20m A B C Recording mode Approximate remaining recordable time (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to 0h00m00s. ( h is an abbreviation for hour, m for minute and s for second.) 23 (ENG) VQT3B29

24 Basic Recording/ Playback 3 Recording still pictures 1 Change the mode to. 2 Open the LCD monitor or extend the viewfinder. 3 Press the button halfway. (For auto focus only) 4 Press the button fully. Align with the status indicator A. About the screen indications in still picture recording MEGA 14.2M R3000 : Still picture operation indicator ß: Flash ßj: Flash level : Red eye reduction MEGA : MEGA optical image stabilizer : Optical image stabilizer (l 31) : Quality of still pictures 14.2M : Size of still pictures R3000: Remaining number of still pictures (Flashes in red when [0] appears.) : AF assist lamp 24 VQT3B29 (ENG)

25 Basic Recording/ Playback 4 Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. /MANUAL Intelligent auto/manual button Press this button to switch intelligent auto mode/manual mode. Mode Scene Effect Portrait When the object is a person *1 In motion picture recording mode only *2 In still picture recording mode only Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly. Scenery Recording outdoors The whole landscape will be recorded vividly without whiting out the background sky, which may be very bright. *1 Spotlight Under a spotlight Very bright object is recorded clearly. *1 Low light Dark room or twilight It can record very clearly even in a dark room or twilight. *2 Night portrait Recording night portrait *2 Night scenery Recording night scenery *2 Macro Recording zooming in on a flower etc. *1 *2 A person and the background are recorded with near real-life brightness. You can record night scenery vividly by slowing the shutter speed. This allows recording while going near to the object of recording. Normal Other situations Contrast is adjusted automatically for clear image. Depending on the recording conditions, the unit may not enter the desired mode. In the Portrait, Spotlight and Low light mode, one that is bigger and close to centre of the screen will be surrounded by an orange frame. It is recommended using a tripod in night portrait and night scenery mode. Faces cannot be detected depending on the recording conditions, such as when faces are of certain sizes or at certain tilts or when digital zoom is used. The microphone setup is set to surround in the intelligent auto mode. 25 (ENG) VQT3B29

26 Basic Recording/ Playback 5 Motion picture/still picture playback Align with the status indicator A. 1 Change the mode to. 2 Touch the play mode select icon B. 3 Select the [VIDEO/PICTURE] you wish to play back. Touch [ENTER]. Select the [MEDIA] and [VIDEO/ PICTURE] you wish to play back. Touch [ENTER]. 4 Touch the scene or the still picture to be played back. C 1080/50p is displayed when [1080/50p] is touched or is displayed when [AVCHD] is touched in step 3. Next (previous) page can be displayed by touching /. 26 VQT3B29 (ENG)

27 5 Select the playback operation by touching the operation icon. 0h00m00s A Operation icon Touch F / F to display/not-display the operation icon. F Motion picture playback 1/;: Playback/Pause 6: Rewind playback 5: Fast forward playback : Stops the playback and shows the thumbnails. 1: Displays the direct playback bar. Still picture playback 1/;: Slide show (playback of the still pictures in numerical order) start/pause. 2;: Plays back the previous picture. ;1: Plays back the next picture. : Stops the playback and shows the thumbnails. 27 (ENG) VQT3B29

28 Basic Setup 1 Using the menu screen 1 Press the MENU button. 2 Touch the top menu A. 3 Touch the submenu B. Next (previous) page can be displayed by touching /. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. About guide display After touching, touching the submenus and items will cause function descriptions and settings confirmation messages to appear. After the messages have been displayed, the guide display is cancelled. Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then touch [SETUP] > [LANGUAGE]. 2 Touch [English]. 28 VQT3B29 (ENG)

29 Advanced Recording (Advanced) 1 Zoom in/out function The maximum optical zoom ratio is 12k. The default setting of the [ZOOM MODE] is [i.zoom 18k]. It can be extended to a maximum of 18k during motion picture recording mode. Change the mode to or. 6 W T VOL W T W VOL T Zoom lever/adjust zoom buttons T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) The zoom speed varies depending on the range over which the zoom lever is moved. The adjust zoom buttons are useful for making fine adjustments to the zoom magnification. Zoom mode Set the maximum zoom ratio for the motion picture recording mode. Change the mode to. : [RECORD SETUP] # [ZOOM MODE] # desired setting [Opt.Zoom 12k]: Optical zoom only (Up to 12k) [i.zoom 18k]: This zoom function allows you to maintain high-definition picture quality. (Up to 18k) [D.Zoom 30k]: Digital zoom (Up to 30k) [D.Zoom 700k]: Digital zoom (Up to 700k) The larger the digital zoom magnification, the more the image quality is degraded. This function cannot be used in still picture recording mode. 29 (ENG) VQT3B29

30 Ring zoom Extra optical zoom Zoom operation can be done using the multi manual ring. Zoom by rotating the ring. A B A side: Close-up recording (zoom in) B side: Wide-angle recording (zoom out) The zoom speed varies depending on the speed to rotate the ring. If the number of the recording pixels is set to anything other than the maximum number of recording pixels in still picture recording mode, the still picture can be recorded with a zoom ratio of a maximum of 25k without degrading the picture quality. Extra optical zoom ratio varies depending on the setting of [PICTURE SIZE] and [ASPECT RATIO]. Extra optical zoom mechanism When you set the picture size to 0.3M, the maximum 12.2M area is cropped to the centre 0.3M area, allowing a picture with a higher zoom effect. If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded. When returning the zoom lever to the original position, move it quietly. When the zoom magnification is 12k, the subjects are focused at about 1.2 m or more. When the zoom magnification is 1k, this unit can focus on a subject approx. 4 cm away from the lens. The zoom speed does not vary when operating with the adjust zoom buttons and the remote control. 30 VQT3B29 (ENG)

31 Advanced Recording (Advanced) 2 Image stabilizer function Use the image stabilizer to reduce the effects of shake during recording. This unit is equipped with HYBRID O.I.S. HYBRID O.I.S. is a hybrid of optical and electrical image stabilizer. Change the mode to or. O.I.S. Optical image stabilizer button Press the button to turn optical image stabilizer on/off. (Motion picture recording mode) / # OFF When [HYBRID O.I.S.] is [ON], is displayed. When [OFF], is displayed. When recording with a tripod in motion picture recording mode, we recommend that you set to OFF. (Still picture recording mode) / # OFF When [O.I.S.] is [MODE1], is displayed. When [MODE2], is displayed. Changing image stabilizer mode (Motion picture recording mode) : [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF] When set to [ON], you can further improve image stabilization for recording while walking, or holding the unit and recording a distant subject with zoom. This function s default setting is [ON]. (Still picture recording mode) : [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2] [MODE1]: The function works all the time. [MODE2]: The function works when the button is pressed. We recommend you are recording yourself or recording with a tripod in still picture recording mode. Optical image stabilizer lock In motion picture recording mode, you can further improve optical image stabilization by touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects of the shake that tends to occur when using zoom. 31 (ENG) VQT3B29

32 Advanced Recording (Advanced) 3 Recording 3D video With the supplied 3D Conversion Lens attached, you can record life-like and powerful 3D video. To view 3D video, a television that supports 3D is required. 3D video The image is an illustration. In the unit, the recordable 3D videos are side-by-side format (2-screen structure). Since the 3D video is recorded in side-by-side format, the recorded 3D video is not of high definition picture quality. Attaching the 3D Conversion Lens 1 Rotate the lens rear cap in the direction indicated by the arrow. Rotate the lens rear cap while pushing on the attachment screw with your fingers. 2 Match the position of the convex A on the 3D Conversion Lens with the concave B in the unit. Attach with the adjustment dial cover C of the 3D Conversion Lens facing upwards. You cannot attach the 3D Conversion Lens together with the lens hood or a filter etc. 32 VQT3B29 (ENG)

33 3 Tighten the attachment screw of the 3D Conversion Lens by rotating to LOCK. Be careful not to overtighten. If the 3D Conversion Lens is overtightened, it may not be possible to remove it from the unit. Attach the 3D Conversion Lens securely so it will not tilt or move. LOCK Recording 3D video When using for the first time, be sure to adjust the 3D Conversion Lens attachment position. Turn off the unit. Change the mode to. 1 Attach the 3D Conversion Lens to the unit. (l 32) 2 Turn on the unit. Turn on with the unit in a horizontal state. The 3D Conversion Lens adjustment mode screen will appear automatically after performing the initial setting. If the 3D Conversion Lens adjustment mode screen does not appear automatically, set from the menu. ([SETUP] # [3D CONV. LENS SETUP]) If the unit is turned on with the USB cable still connected, the USB connection will take priority. 3 Attach the lens front cap to the 3D Conversion Lens. 2 screens will appear. The horizontal line for adjustment on the lens front cap is displayed on the screen. A Guide Line 4 Touch [ADJUST]. If the black vertical line and the black horizontal line are within the red guidelines A and adjustment is not required, touch [EXIT] and proceed to step 11. Perform the adjustment in a bright location where the horizontal line for adjustment will be clearly visible. The 3D Conversion Lens cannot be adjusted using the viewfinder. 33 (ENG) VQT3B29

34 5 Open the adjustment dial cover. When turning the adjustment dials, hold the 3D Conversion Lens in the palm of your hand from the bottom and operate with the fingers of your other hand without applying too much force from above. When checking the adjustment, check with your fingers off the adjustment dials. 6 (After checking the operation description, touch [NEXT].) To adjust the horizontal position, rotate the horizontal image position adjustment dial so that the black vertical line is between the red guidelines A. Touch [NEXT]. 7 (After checking the operation description, touch [NEXT].) To adjust the vertical position, rotate the vertical position adjustment dial so that the black horizontal line at the right of the screen is in the centre of the red guidelines A. Touch [NEXT]. 34 VQT3B29 (ENG)

35 8 Removing the lens front cap. Touch [NEXT]. 9 (After checking the operation description, touch [NEXT].) Adjust the vertical alignment adjustment dial position of the subject shown duplicated. to align the vertical 7/8 7/8 Aim the unit at a subject from a distance of approximately 1.2 m to 2 m, and keep the image shown level by using the guidelines A. Difference in horizontal direction is characteristic of 3D video. It is recommended to stabilize the unit using the lens front cap as a platform when performing the adjustment.(l 11) Touch [COMPLETE]. 10 Touch [EXIT] to end the adjustment. After adjustment, a single screen appears. 3D 0h00m00s When re-attaching the 3D Conversion Lens or HG R 1h20m after an impact etc., it is recommended that you perform the adjustment again. 11 Press the recording start/stop button to start recording. B 3D appears. When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoom operation is disabled. When recording in 3D, the image will appear with black frame around it. The black frame will be recorded in the video. To ensure that the 3D video can be safely viewed, pay attention to the following points when recording. Where possible, record with the unit in a horizontal state. Do not get too close to the subject. (record from a distance of at least 1.2 m.) When moving the unit as you record, move it slowly. Try to hold the unit as steady as possible when recording while riding in a vehicle or walking. 35 (ENG) VQT3B29

36 Use of a tripod is recommended for recording with a stable picture. The reception range for the remote control might become narrow at the upper side of the unit, so operate from the lower side. You will hear a sound when the unit is moved rapidly with the 3D Conversion Lens attached, but this is not a malfunction. When the adjustment dial is rotated too much, you will hear a clapping sound and the adjustment screen will stop moving. In such a case, rotate the adjustment dial in the opposite direction until the adjustment screen starts moving. [ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position. When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. While 3D recording if moving the unit fast, the message is more likely to appear. Removing the 3D Conversion Lens Rotate the attachment screw to UNLOCK to loosen and then remove. Place the unit on a stable location such as a table, and be careful not to drop the 3D Conversion Lens. UNLOCK Be careful not to lose the lens cap. When storing, always fit the lens caps to avoid scratching the protective glass. Functions that cannot be used during 3D recording When recording with the 3D Conversion Lens, you cannot use certain functions. Functions not available during 3D recording (Button/lever operations) jzoom in/out function *1 jhybrid O.I.S. *2 jintelligent auto mode jaf/ae tracking j1080/50p recording jstill picture recording (still picture recording mode, and still picture recording in motion picture recording mode) jmanual operations (focus, shutter speed, iris) j[ext DISPLAY] (remote control) *1 The zoom position is fixed, and the zoom operation is disabled. *2 The normal optical image stabilizer and optical image stabilizer lock can be used. 36 VQT3B29 (ENG)

37 Advanced Editing 1 Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. Change the mode to. F 0h00m00s To delete by confirming images being played back Press the button while scenes or still pictures to be deleted are being played back. Deleting multiple scenes/still pictures from the thumbnail display 1 Press the button while the thumbnail view screen is displayed. 2 Touch [ALL SCENES] or [SELECT]. When [ALL SCENES] is selected, all the scenes or still pictures on the selected media will be deleted. (In case of playing back scenes or still pictures by date, all the scenes or still pictures on the selected date will be deleted.) Protected scenes/still pictures cannot be deleted. 3 (When [SELECT] is selected in step 2) Touch the scene/still picture to be deleted. When touched, the scene/still picture is selected and the thumbnails. Touch the scene/still picture again to cancel the operation. Up to 99 scenes can be selected to be deleted. 4 (When [SELECT] is selected in step 2) Touch [Delete] or press the button. To continuously delete other scenes/still pictures, repeat steps 3-4. indication appears on the When you stop deleting halfway Touch [CANCEL] or press the MENU button while deleting. The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored. To complete editing Press the MENU button. 37 (ENG) VQT3B29

38 Advanced Editing 2 Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. Select the menu. (l 28) : [SETUP] # [FORMAT CARD] : [SETUP] # [FORMAT MEDIA] # [SD CARD] or [Built-inMemory] When formatting is complete, touch [EXIT] to exit the message screen. Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred. (Refer to the Operation Instructions (PDF format)) Perform a physical formatting of the built-in memory when this unit is to be disposed/ transferred. (Refer to the Operation Instructions (PDF format)) Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations or shock. Use this unit to format media. Formatting built-in memory is only available with this unit. Do not format an SD card using any other equipment such as a PC. The card may not be used on this unit. 38 VQT3B29 (ENG)

39 Advanced With a TV 1 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal Use the AV multi cable (supplied) or HDMI mini cable (supplied/optional) and check the output settings. Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal. HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound. 1 Connect this unit to a TV. A HDMI mini cable Be sure to connect to the HDMI terminal. B AV multi cable (supplied) Picture quality 1 High definition images when connecting to HDMI terminal 2 High definition images when connecting to component terminal compatible with 1080i Standard images when connecting to component terminal compatible with 576i 3 Standard images when connecting to video terminal 39 (ENG) VQT3B29

40 Check that the plugs are inserted as far as they go. Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). Do not use any other AV multi cables except the supplied one. When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required. When connecting to the AV terminal of the TV, do not connect the component terminal plug of the AV multi cable. Image may not display when the component terminal plug is connected simultaneously. 2 Select the video input on the TV. Example: Select the [HDMI] channel with a HDMI mini cable. Select the [Component] or [Video 2] channel with an AV multi cable. (The name of the channel may differ depending on the connected TV.) Check the input setting (input switch) and the audio input setting on the TV. (For more information, please read the operating instructions for the TV.) 3 Change the mode to to play back. Cables Reference items A HDMI mini cable Connecting with a HDMI mini cable Listening in 5.1 channel sound Playback using VIERA Link (HDAVI Control ) B AV multi cable (supplied) Connecting with the AV multi cable 40 VQT3B29 (ENG)

41 Advanced With a TV 2 3D video playback Connect the unit to a 3D compatible television and play back scenes recorded in 3D to enjoy life-like and powerful 3D video. For the latest information on 3D compatible televisions and recorders that are capable of playing back 3D video recorded using the unit, see the support site below. Change the mode to and touch the play mode select icon to select [SD CARD]/[AVCHD] or [Built-inMemory]/[AVCHD]. (l 26). 1 Select the menu. : [SETUP] # [3D PLAYBACK] # [3D] [3D]: [2D]: Play back scenes recorded in 3D in unaltered form as 3D video. If your television does not support 3D, set to [2D] to play back scenes recorded in 3D. 2 Connect the unit to 3D compatible television and play back scenes recorded in 3D. (l 39) Connect the unit to the 3D compatible television using the HDMI mini cable. For the scenes recorded in 3D, 3D will appear on the thumbnail display at playback. Playback switches between 3D video and 2D video automatically. If your television does not switch to a 3D video, make the necessary settings on the TV. (For further details, please read the operating instructions for the TV.) Playing back scenes recorded in 3D as (conventional) 2D video : [SETUP] # [3D PLAYBACK] # [2D] Set to [2D] when using a television that is not 3D compatible. If you feel tired, uncomfortable or otherwise strange when viewing scenes recorded in 3D, set to [2D]. 41 (ENG) VQT3B29

42 You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes recorded in 3D on the LCD monitor, they will be played back in 2D. You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the same day, the unit will display the date separately when switching between 2D and 3D recordings. When you play back scenes successively, a black screen will appear for a few seconds between scenes recorded in 3D and scenes recorded in 2D. When outputting 3D video to a television, the date and time display is double normal size. In the 1 scene or Highlight&Time frame index thumbnail display, a black frame appears around the thumbnails. For the 9 scenes or 20 scenes thumbnail display, black frames may appear when a divide or repair is performed. (The unit automatically performs scene repair if faulty management information is detected.) When you select a 3D video thumbnail, it may take a few seconds for playback to start. After playback, the thumbnail display may take a few seconds to reappear. If you set [3D PLAYBACK] to [3D] with the unit connected to a television that does not support 3D, the video will be played back in 2 screens. Depending on the 3D-compatible television used, switching to 3D mode may be slow and you may not be able to watch the first scene. In this case, use the pause button. When viewing 3D video, your eyes may become tired if you are too close to the television screen. Use the supplied remote control to operate from a distance. Functions not available during 3D playback jcreating still picture from motion picture jhighlight&time frame index ([FACE], [HIGHLIGHT]) jyellow button display and deletion function during VIERA Link (During playback only) jface highlight playback jhighlight playback jintelligent scene selection 42 VQT3B29 (ENG)

43 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording; 6.0 W Signal system: 1080/50p, 1080/50i Recording format: 1080/50p; Original format HA/HG/HX/HE; AVCHD format compliant Image sensor: 1/4.1 type (1/4.1z) 3MOS image sensor Total; 3050 Kk3 Effective pixels; Motion picture; 2530 Kk3 (16:9) Still picture; 2320 Kk3 (4:3), 2630 Kk3 (3:2), 2530 Kk3 (16:9) Lens: Auto Iris, F1.5 to F2.8 Focal length; 3.45 mm to 41.4 mm Macro (Full range AF) 35 mm equivalent; Motion picture; 35 mm to 420 mm (16:9) Still picture; 38.8 mm to 466 mm (4:3), 35.7 mm to 428 mm (3:2), 35 mm to 420 mm (16:9) Minimum focus distance; Normal; Approx. 4 cm (Wide)/Approx. 1.2 m (Tele) Tele macro; Approx. 70 cm (Tele) Intelligent auto Macro; Approx. 1 cm (Wide)/Approx. 70 cm (Tele) Filter diameter: 46 mm 43 (ENG) VQT3B29

44 Zoom: 12k optical zoom, 18k i.zoom, 30k/700k digital zoom Monitor: 7.6 cm (3z) wide LCD monitor (Approx. 230 K dots) Viewfinder: 0.69 cm (0.27z) wide EVF (Approx. 123 K dots) Microphone: 5.1 channel surround microphone (with a zoom microphone/focus microphone function) Speaker: 1 round speaker, dynamic type White balance adjustment: Auto tracking white balance system Standard illumination: 1,400 lx Minimum required illumination: Approx. 1.6 lx (1/25 with low light mode in the scene mode) Approx. 1 lx with the colour night view function AV multi connector video output level: Component video output level; Y; 1.0 Vp-p, 75 h Pb; 0.7 Vp-p, 75 h Pr; 0.7 Vp-p, 75 h AV video output level; 1.0 Vp-p, 75 h, PAL system HDMI mini connector video output level: HDMI (x.v.colour ) 1080p/1080i/576p AV multi connector audio output level (Line): 316 mv, 600 h, 2 ch Headphone output: 77 mv, 32 h (Stereo mini jack) 44 VQT3B29 (ENG)

45 HDMI mini connector audio output level: Dolby Digital/Linear PCM MIC input: j70 dbv (Mic sensitivity j50 db equivalent, 0 db=1 V/Pa, 1 khz) (Stereo mini jack) USB: Reader/writer function SD card; Read/Write (No copyright protection support) Built-in memory; Read only Hi-Speed USB (USB 2.0), USB terminal Type Mini AB USB host function (for DVD burner) Flash: Available range; Approx. 1.0 m to 2.5 m Dimensions: 66 mm (W)k69 mm (H)k138 mm (D) (excluding projecting parts) Mass: Approx. 375 g [without battery (supplied) and an SD card (optional)] Approx. 380 g [without battery (supplied)] Mass in operation: Approx. 435 g [with battery (supplied) and an SD card (optional)] Approx. 440 g [with battery (supplied)] Operating temperature: 0 oc to40oc Operating humidity: 10%RH to 80%RH Battery operation time: See page (ENG) VQT3B29

46 3D Conversion Lens Dimensions: 78 mm (W)k59 mm (H)k97 mm (D) Mass: Approx. 195 g Lens (when attached to the unit): F3.2 (f = 2.5 mm) 35 mm equivalent; 58 mm Minimum recording distance; Approx. 1.2 m Stereo base: 12.4 mm Minimum illumination: Approx. 28 lx (1/25 when [AUTO SLOW SHTR (3D)] is set to [ON]) Motion pictures Recording media: SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exfat system compliant) Refer to page 16 for details on SD cards usable in this unit. Built-in memory; 32 GB Compression: MPEG-4 AVC/H.264 Recording mode and transfer rate: 1080/50p; Approx. 28 Mbps (VBR) HA; Approx. 17 Mbps (VBR) HG; Approx. 13 Mbps (VBR) HX; Approx. 9 Mbps (VBR) HE; Approx. 5 Mbps (VBR) Refer to the operating instructions (PDF format) for the recordable time. Picture size: 1080/50p; 1920k1080/50p HA/HG/HX/HE; 1920k1080/50i Audio compression: Dolby Digital/5.1 ch (built-in microphone), 2 ch (built-in microphone/external microphone) 46 VQT3B29 (ENG)

47 Still pictures Recording media: SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exfat system compliant) Refer to page 16 for details on SD cards usable in this unit. Built-in memory; 32 GB Compression: JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size: Picture aspect [4:3]; 4032k3024/3200k2400/2560k1920/640k480 Picture aspect [3:2]; 4608k3072/3600k2400/2880k1920 Picture aspect [16:9]; 4864k2736/3840k2160/3072k1728/1920k1080 Refer to the operating instructions (PDF format) for the number of recordable pictures. AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions: 92 mm (W)k33 mm (H)k61 mm (D) Mass: Approx. 115 g Specifications may change without prior notice. 47 (ENG) VQT3B29

48 Others About copyright Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. Licenses SDXC Logo is a trademark of SD-3C, LLC. AVCHD and the AVCHD Logo are trademarks of Panasonic Corporation and Sony Corporation. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. HDMI, the HDMI Logo, and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. HDAVI Control is a trademark of Panasonic Corporation. x.v.colour is a trademark. LEICA is a registered trademark of Leica Microsystems IR GmbH and DICOMAR is a registered trademark of Leica Camera AG. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S. Intel, Core, Pentium and Celeron are the registered trademarks or trademarks of Intel Corporation in the United States and other countries. AMD Athlon is a trademark of Advanced Micro Devices, Inc. imovie and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. PowerPC is a trademark of International Business Machines Corporation. Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned. This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard ( AVC Video ) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See 48 VQT3B29 (ENG)

49 Others Reading the Operating Instructions (PDF format) You have practised the basic operations introduced in these operating instructions and want to progress to advanced operations. You want to check the Troubleshooting. In these kinds of situations refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied). For Windows 1 Turn the PC on and insert the CD-ROM containing the Operating Instructions (supplied). 2 Select the desired language and then click [Operating Instructions] to install. (Example: When an English language OS) 3 Double click the Operating Instructions shortcut icon on the desktop. When the Operating Instructions (PDF format) will not open You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to browse or print the Operating Instructions (PDF format). Download and install a version of Adobe Reader that you can use with your OS from the following Web Site. otherversions If using the following OS jwindows 2000 SP4 jwindows XP SP2/SP3 jwindows Vista SP1/SP2 jwindows 7 Insert the CD-ROM containing the Operating Instructions (supplied), click [Adobe(R) Reader(R)] and then follow the messages on the screen to install. To uninstall the Operating Instructions (PDF format) Delete the PDF file from the Program Files\Panasonic\HDC\ folder. When the contents in the Program Files folder cannot be displayed, click the [Show the contents of this folder] to display them. For Mac 1 Turn the PC on and insert the CD-ROM containing the Operating Instructions (supplied). 2 Open the Manual folder in the CD-ROM and then copy the PDF file with the desired language inside the folder. 3 Double click the PDF file to open it. 49 (ENG) VQT3B29